Welcome to Ever-Power Group!

Installation and lubrication method of Servo Gearhead

The number of clicks:   Updated: 21/02/24 14:53:02 Source:servogearhead.com share it:
   Servo Gearhead is a power transmission mechanism that uses a gear speed converter to decelerate the number of revolutions of the motor to the required number of revolutions and obtain a larger torque.It is a relative machine, the purpose of using it is to reduce the speed and increase the torque.Let me introduce to you its installation and lubrication methods:
  First, the installation
  1. Servo Gearhead generally needs to be installed on a horizontal surface with an inclination not exceeding 10°. If the inclination is greater than 10° due to special needs, please contact our company before use to discuss related matters.
  2. When the input shaft and output shaft are connected to the power and supporting machinery, if the coupling is used, the shaft and the shaft are required to be strictly aligned, and there should be no misalignment. The use of V-belts and chains should not be too tight or too loose.
  3. The installation foundation should be firm and reliable, and there should be no vibration or looseness. The fixing screws should be selected in strict accordance with relevant standards and regulations.
  4. The installation screws should be checked from time to time whether they are tightened, and the fixing is firm, and spring washers should be used as much as possible for the washers.
   Servo Gearhead
  XNUMX. Lubrication
  1. Servo Gearhead is generally lubricated by an oil tank. Before use, be sure to add medium and pressure gear oil N220 or N320 to the specified position and refill it regularly.
  2. For the first 50 hours of use, the oil should be replaced immediately, and the oil inside the body should be cleaned, and then replaced every three months.
  3. If the oil seal leaks, please replace it yourself as soon as possible.
  The above is the introduction of the specific method of installation and lubrication of Servo Gearhead. According to the operation, the maintenance of the equipment can be better completed, so as to better complete its use efficiency.

Ever-Power Group
Contact: Mr.Alan
Tel: 1396435379 
Add: Nanyu City Industrial Park, Boshan District, Zibo City